Show Ad



Contact Brandon
: 7857842721
: USA, KS, Ft. Riley
: $27,300.00

The truck:

1957 Chevrolet 3200 converted to 4X4. Purchased in 2008 and began process of restoring in 2008. Started body off process in August 2009 and completed in January 2012. I have driven this about 300 miles since the work was completed. Stored indoors and has had very little use.

Here is the build thread: http://67-72chevytrucks.com/vboard/showthread.php?t=321380&page=5

It has a new GM 350 crate engine with mild cam, rebuilt SM 465 and NP205 transfer case. A listing of the work and parts are below:

Body:

-Pulled down to frame

-Entire body media blasted

-Back of cab replaced

-D/S step replaced

-D/S fender bottom replaced

-Front cab corners replaced

-Inner rear cab corners deleted

-Original grill and emblems re-chromed

-Painted with epoxy primer, Keystone 3 in 1 primer, Omni base (Stealth Grey) with Keystone Euro Clear

-Al’s liner (body tinted) sprayed underneath cab, on the firewall and inside fenders. Also sprayed on inside of the cab in the carpeted areas

-Aluminum fuel tank under bed with custom filler on fender

-Ashe bed wood with stainless bed strips

-Brake pedals relocated to firewall with hydraulic clutch

-Stainless steel fasteners

-Stainless tailgate chains

-Stainless overflow and windshield washer reservoir

Powertrain:

-New GM 350 small block with RV cam, quadrajet carb and Summit Racing intake.

-Sanderson cast shorty headers with ceramic coating

-Rebuilt HEI distributor

-New PS pump

-Alan Grove alternator, AC and power steering brackets

-Custom air cleaner, valve covers, breathers and plug wire holders

-Corvette master cylinder

-Dana 44 and Corporate 12 bolt rear axle

-Vintage air Gen III air conditioning and heat

-Mickey Thompson Classic II wheels with Maxxis Bighorn 255/85 R16 tires

-SM 465 transmission and NP205 transfer case. Both rebuilt

-Stainless steel brake and fuel lines

-Braided stainless brake lines from frame to axles

-New aluminum radiator

Electrical and Sound:

-American Autowire classic update 21 circuit wiring harness

-Custom sound system:

-JBL marine audio unit with wired and wireless remote

-JBL XD 600/6 amplifier

-Polk Audio 6 ½ speakers in front kick panels

-6 ½ subs under seat along with amplifier and head unit for stereo

-Dolphin gauges and billet insert for instrument cluster

-Stainless LED tail lights

-LED backup lights

-Upgraded headlights

-Newport wipers wiper motor

Interior:

-Custom upholstery with Rod Doors kick panels and door panels. Interior work performed by Bright Built Hot Rods in Salina Kansas.

-3 point seatbelts (driver and passenger)

-LED billet aluminum dome light

-Sound deadener applied to inside of cab

-Bear claw door latches

-Chrome tilt column

-CON2R steering wheel with custom one off horn button

-All new glass with one piece side windows

This Ad has been viewed 7884 times.